DC PowerCube 24 VDC – 150 A

Heavy-duty battery charger / power supply model DC PowerCube 24 VDC – 150 A. Designed for more extensive electrical systems with a large battery bank and significant DC consumption. It converts the delivered power (from the grid or generator) to DC for lighting, electronic equipment, pumps and other DC loads.

Compare this product

DC power up to 150 A

AC can be adjusted from 4 A to 16 A

Provides up to 3.5 kW from land power

Up to 4.3 kW from Genverter©

Adjustable Genverter© load (as well as rpm)

12 VDC / 20 A output, three-step for 12 VDC batteries

Standard analogue panel supplied

WhisperConnect CAN-bus connection for central monitoring

Suitable for worldwide use, 90 to 264 VAC, 50/60 Hz (automatically adjusts)

Ensuring Power for All Onboard Equipment

The DC PowerCube series is engineered to deliver up to 4.3 kW of power. This makes it powerful to quickly charge batteries while also providing sufficient energy for both DC and AC loads. Its capability ensures that all equipment on board, from small boats to even the largest yachts and ships, can be efficiently powered. The DC PowerCube 24 VDC – 150 A can even be used as a power supply, without batteries, as the smooth output voltage is incredibly uniform and ripple free.

Benefits

High powered charger / power supply for entire DC-system
Ultra-short charging time and therefore saves fuel
Battery type adjustable from laptop or dipswitch settings: AGM, GEL, Lead acid, Traction, Lithium
Smooth ripple-free DC output no “flickering” lights
Various outputs: 24 VDC main output, 24 VDC slave, 12 VDC for one or more batteries
Can be connected to any mains voltage or capacity
Dual input: AC supply supplemented with uniform Genverter© input

Product specifications

ARTICLE NUMBER
60202002	DC PowerCube 24 V - 150 A

DIMENSIONS & WEIGHT
Weight kg (lb.)	26 (57.3)
Dimensions (W x D x H) (mm)	268 x 316 x 575

GENERAL SYSTEM SPECIFICATIONS
Nominal battery voltage	24 VDC
Output current	0 - 150 A (short circuit protected)
Output voltage	26.5 / 28.5 VDC
Recommended battery capacity:	300 to 1500 Ah
Charge characteristic	3+ step charge characteristic
Slave charger	12 V - 20 A (3+ step charge characteristic) short circuit protected

INPUT SPECIFICATIONS
Grid input voltage range	90 - 264 VAC (45 - 65 Hz), (3 wire connection)
Grid input current	Adjustable, from 2 A to 16 A
PM generator input range	80 - 300 VAC (30 - 500 Hz), (3 wire connection)
PM input current	Adjustable, from 2 A to 14.5 A
Power factor (cos phi)	> 0.85
Power Factor Correction (PFC)	EN 61000-3-2
Temperature compensation	-30 mV / °C

TECHNICAL SPECIFICATIONS
Supported battery types	Open and sealed lead acid: Gel / Traction / AGM / Spiral and Lithium-ion
Battery leakage current	<5 mA per battery
Charge voltages	Bulk, Absorption, Float
Charge voltage AGM / GEL at 25°C	28.80 VDC, 28.50 VDC, 27.20 VDC
Charge voltage Traction at 25°C	29.20 VDC, 28.90 VDC, 26.50 VDC
Charge voltage Open lead acid at 25°C	28.50 VDC, 28.50 VDC, 26.50 VDC
Charge voltage Lithium ION at 25°C	28.80 VDC, 27.20 VDC, 26.50 VDC
Return current from absorption to float	6% of Imax
PowerCube status on/off	Digital output (relay, two-way contact)
Failure	Digital output (relay, two-way contact)
AC grid disabled	Digital input (potential free input, closed is disabled)
PM input disabled	Digital input (potential free input, closed is disabled)
Conformity	Directive EMC 2004/108/EC : EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022,EN 61000-3-2, 62040-2 Low voltage directive 2006/95/EC: EN 62040-1-1, EN 50091-2, EN 60950-1

PROTECTIONS
PM input isolation protection	Yes (open collector output 30 VDC, 100 mA)
Over temperature protection	Yes, derating above 40°C, shutdown at high temperatures. (with automatic restart after cooling down)
Overvoltage protection (manual restart needed)	36 VDC + / - 0.5 VDC
Ingress Protection index	IP21

MECHANICAL SPECIFICATIONS
Main battery connection	2 x M10 studs
Slave battery connection	1 x M5 stud
Earth grounding lug	1 x M6 stud
AC grid input	3 x M3 screw terminal block
PM grid input	3 x M3 screw terminal block
Remote control panel	RJ12
Battery temperature sensor	RJ12
Whisper Connect CANbus	RJ45
Voltage sense	Phoenix MSTB 2.5 / 2-ST-5.08
Digital outputs	6 x fastons (6.3x0.8)
Digital inputs	4 x fastons (6.3x0.8)
Operating temperature range	-20 - 55°C (derating above 40°C)
Relative humidity in operation	up to 95% without condensation
Ventilation	Combined cooling (convection and forced (variable speed))
Acoustic level	<52 dB
Warranty	2 years
Accessories	Battery temperature sensor and remote control panel