Back to Solar Power

Solar charge controllers

(8 products)

WhisperPower Solar Charge Controllers

SunTrack, the WhisperPower Solar Charge Controller, forms an important link between the solar panel(s) and the battery(s). Solar charge controllers ensure maximum efficiency and a safe charge voltage for the battery. There is a choice of a number of power outputs and two types of technology.

Cost effective Solar Charge Controllers

The WhisperPower Solar Charge PWM controller is the “cost effective”, entry level controller with 1 or 3 stage charge characteristics. The controller ensures that the irregular voltage from the panel is converted into a stable charge volt- age. In general, this is used for systems with 1 panel. The WP Suntrack MPPT controllers are designed for 12 or 24 V Solar systems > 200 WP. Read here more about the Solar Charge Controller PWM 12 V 10 A or the Solar Charge Controller PWM 12 V 20 A.

Solar Charge Controllers specifications

  • Suitable for almost every type of battery: GEL, AGM or open lead
  • Plug-and-play connectors for panel, battery and 12 V load
  • Automatic shut down if battery voltage (too) low
  • Can feed up to 20 amps/ 450 Watts solar power to the batteries
  • Temperature compensation as standard
  • LEDs battery indicator and load status

Suntrack MPPT Solar Charge Controllers

The SunTrack MPPT (Maximum Power Point Tracker) controller works to get the most out of the solar panels by converting the majority of the yield in to battery power. Several high frequency panels (up to 600 VDC) can be connected to the Soundtrack MPPT controllers, creating a powerful generator with maximum efficiency. In general, this is used for systems with several panels, for example: on the roof of a large truck.

WP-Suntrack Pro series

The WP-Suntrack Pro is a essential component for professional off- grid power systems. Choose the WP-Suntrack Pro for a fast and 100% re-charge of the battery.

  • WhisperCare connectable
  • Two models: 65 Amp and 80 Amp power
  • Suitable for 12, 24 and 48 VDC Solar Systems
  • Input voltage up to 150 VDC
  • Automatic tracking of the maximum power point
  • Fully compliant to our Grid Independer Solar/ Diesel power System
  • Suitable to charge any type of battery including Lithium ION

WP-Suntrack Pro 12 – 48 V / 40 A
WP-Suntrack Pro 12 – 48 V / 65 A
WP-Suntrack Pro 12 – 48 V / 80 A

WP-Suntrack DUO series

The Solar – Alternator Battery Charger is a fully automatic multi-stage, multi-input battery charger with the ability to charge from either an alternator linked to a battery, or via solar power with the Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays.

During normal operation the Solar – Alternator Battery Charger will do a full charge cycle to float stage on the house battery bank with ability to choose either GEL, AGM, Flooded, Custom Programmable or Lithium. Once float stage is reached the charger transitions to a power supply mode to support any on-board DC loads.

WP-Suntrack DUO 12 V / 30 A
WP-Suntrack DUO 12 V / 50 A

WP-Suntrack 50

The WhisperPower Suntrack 50 MPPT Solar Charge controller is connecting solar panels to a 12, 24 or 48 VDC battery. The Suntrack 50 comes with a monitoring APP (Ecosolar) and bluetooth connection. The advanced MPPT technology ensures a complete and fast charge, even under cloudy and fluctuating weather circumstances.

WP-Suntrack 50