60110421 Front1
60110421 Front Open
60110421 Front1
60110421 Front Open

Suntrack Pro 12 – 48 V / 80 A

The Suntrack combines an superior mpp tracking and a perfect charge algorithm, ensuring a fast and reliable charge of the batteries. this includes multi stage temperature compensated charging. the Suntrack should be installed between the solar array and the battery. the mppt continuously seeks out the solar generator’s optimal voltage to retrieve the maximum available energy. this operating point varies constantly depending on outdoor conditions (sunlight, temperature etc.) to which it must adapt.

  • 4 step charger for longer battery life
  • Tracking efficiency: >99%
  • Conversion efficiency: 98%
  • Protection against incorrect wiring and reverse polarity
  • Fully configurable
  • IP54 enclosure
  • 8 predefined battery charge curves as standard
  • Up to 15 Wp Suntrack units can be installed in parallel on the same communication bus

Product specifications

ARTICLE NUMBER
60110421Suntrack Pro 12 - 48 V / 80 A
DIMENSIONS & WEIGHT
Weight (Kg)5.5
Dimensions H x W x L120 / 220 / 350 mm
ELECTRICAL
Nominal Battery Voltage12 V / 24 V / 48 V
maximum Solar power Recommended1250 W / 2500 W / 5000 W
maximum Solar VOC80 VDC / 150 VDC / 150 VDC
maximum Solar Vmp75 VDC / 145 VDC / 145 VDC
ELECTRICAL CHARACTERISTICS BATTERY SIDE
maximum Output Current80 A
Nominal Battery VoltagesAutomatic or manual set to 12 / 24 / 48 VDC
Operating Voltage RangeAbove battery voltage, minimum 7 V
PERFORMANCES OF THE DEVICE
power Conversion Efficiency98%
maximum Standby Consumption (48V)25 mA > 1.2 W
maximum Standby Consumption (24V)30 mA > 0.8 W
maximum Standby Consumption (12V)35 mA > 0.5 W
Battery Charge modes4 Stages: Bulk, Absorbtion, Float, Equalisation
Battery temperature compensation (available with accessory BtS-01)-3 mV / oC / cell (25oC ref) default value adjustable -8 to 0 mV / oC
ELECTRONIC PROTECTION
PV Reverse polarityprotected
Battery reverse polarityUp to -150 VDC
Battery overvoltageUp to 150 VDC
Over temperatureprotected
Reverse current at nightprevented by relays
ENVIRONMENT
Operating Ambient temperature Range-20°C to 55°C
Humidity100%
Ingress protection of EnclosuresIp54, IEC/EN60529:2001
mounting LocationIndoor
GENERAL
Warranty5 Years
parallel Operation (separated pV arrays)Up to 15 devices
max wire size35 mm²
Glandsm20 x 1.5
COMMUNICATION
Network CablingWpC Communication Bus
Remote Display and ControllerWp-RC or WP-PSCP
Menu languagesEnglish / French / German / Spanish
Data LoggingWith WP-RC and SD card • One point every minute
ACCORDANCE TO STANDARDS
CE compliantEMC 2004/108/CE • LV 2006/95/CE • RoHS 2002/95/CE
SafetyIEC/EN 62109-1:2010
EMC (Electro Magnetic Compatibility)IEC/EN 61000-6-3:2011 • IEC/EN 61000-6-1:2005