Modular Battery Protect Relay 12 V / 500 A

The DC Modular Battery Protect Relay has the same capabilities as the Remote Battery Switch. It is a smart high current magnetic latching contactor, that can handle continuous DC currents of up to 500 Amps.

Whereas the Remote Battery Switch is mainly used as a locally or externally controlled battery load switch, the Modular Battery Protect Relay has a number of additional features. Most importantly, it can protect your battery without the need for an external measurement and control device.

Comparez ce produit

Local Open and Close buttons on top, to manually override the switch state

Stainless steel studs, washers and nuts for optimal corrosion resistance

Robust transparent covers with breakouts to allow wire access from any direction

Smart terminal design allows dual mirrored cable lug connections

Spécifications du produit

NUMÉRO D'ARTICLE
50214737	Modular Battery Protect Relay 12 V / 500 A

DIMENSIONS ET POIDS
Weight (Kg)	0.8
Dimensions (mm)	150 x 50 x 94

CIRCUIT DE CONTACT (ÉLECTRIQUE)
Maximum voltage	60 Vdc
Nominal current @ 25°C	500 A (see Precaution #2)
Cranking current (1 minute)	1000 A
Nominal make / break current	500 A (0 .. 34 Vdc) 350 A (35 .. 60 Vdc)
Peak make / break current	1600 A (0 .. 34 Vdc) 1200 A (35 .. 60 Vdc)

CIRCUIT DE COMMANDE (ÉLECTRIQUE)
Coil / supply voltage (+Vdc)	7 .. 17 Vdc
Coil / supply current (idle state)	< 100 μA
Coil / supply current (state change)	< 4 A
Control wire supply current	< 3 mA (when active)

GÉNÉRALE
Remote control	By control wires (length 40 cm, max. 15 m)
Local control	On/Standby, Open and Close contact, Override mode
Automatic disconnect and reconnect	Yes (10 individually programmable disconnect and reconnect voltage levels)
Indicators	Contact open/close, Undervoltage disconnect, Override mode, Error and Setup
Protected against	High temperature, High/Low supply voltage, Ignition (ISO 8846)
Mechanical life	100000 cycles
Electrical life	10000 cycles (@ 400 A / 24 V / resistive)
Operating temperature range	-20 .. +60°C
Connection studs / DCM grid size	M10 / 1 x 3
Protection class	IP 65
Standards	EMC: 2014/30/EU, Low voltage directive: 2014/35/EU, RoHS: 2011/65/EU, Automotive: EN 50498, ISO 8846

Modular Battery Protect Relay 12 V / 500 A

Spécifications du produit

Téléchargements

Produits connexes

Remote Battery Switch 12 V / 500 A

DC Charging Relay 12 V

DC Remote Battery Switch 12 V

DC Switch 500 A