Name: AC PowerCube 24 / 7000
SKU: 60203004

AC PowerCube 24 / 7000

The AC PowerCube 24 / 7000 is a professional inverter suitable for continuous operation even under extreme conditions. The AC PowerCube 24 / 7000 makes it possible to switch off the diesel generator for longer periods of time and provide the entire onboard installation with power including, for example, air conditioning, kitchen and refrigeration equipment. As a result, there is less fuel consumption, less noise disruption and fewer running hours for the generator.

The AC PowerCube 7 kVA, can be used for 24 VDC batteries. It contains robust connection terminals for 2 x DC in/ battery negative and 2 x DC in/battery positive. Suitable to connect to one or two separate battery banks. AC output terminal on the left side.

Compare this product

Industrial electronics based on high frequency switched mode technology

Quiet and environmentally friendly

As a result, high efficiency (>92%) and a minimum of powerloss

Significant cost savings from reduced fuel consumption

Great high efficiency = minimal cooling required (cool running)

Fan cooled, resistant to high ambient temperatures

No ripple effect from AC to battery, with as a result, a stable DC network

Product specifications

ARTICLE NUMBER
60203004	AC PowerCube 24 V / 7000 VA - 7 kVA

GENERAL
Nominal output voltage	230 V (±5%), Phase, Neutral, Earth *)
Nominal output frequency (adjustable to 60 HZ)	50 Hz (± 0,01 Hz)
Nominal battery voltage	24 VDC
Nominal power P30 (cos phi = 1) (30 min at 40°C)	7500 W
Peak power (20 s)	15000 W
Continuous power (cos phi = 1) (40°C)	6000 W
AC connection (output)	Internal terminal block, screw terminal (4 .. 6 mm2)
DC connection	4 × M10
Minimum capacity of battery bank	600 Ah
Efficiency	> 85%
Peak efficiency	> 92%
Dimensions(W x H x D-mm)	334 × 316 × 575
Weight	18 kg
Noise level (at 1 m)	< 48 dBA
Operation	Power switch (on / off / remote), the DC inputs (on / off), Remote panel switch (On / Off) *
Indicators	AC present, DC 1 present, DC (1) load, DC 2 present, DC (2) load, AC current, AC voltage
Safety	Short circuit, overload, overheating, battery voltage too low / high

TECHNICAL SPECIFICATIONS
Technology	Six-step multiphase flyback, Switched mode technology
Low battery switch off	19 V (±0.5 V)
Low battery switch on	22 V (±0.5 V)
High battery switch off	32 V (±0.5 V)
High battery switch on	30 V (±0.5 V)
Maximum ripple on DC (battery)	5% RMS
Input current (nominal load)	2 x 200 A
Consumption (no load)	<550 mA, 12 W
Total harmonic distortion (THD)	< 5% (normal)
Allowable power factor	0 <cos phi <1

CONDITIONS
Ambient operating temperature	-20°C .. 40°C
Storage temperature	-25°C .. 80°C (derating above 40 °C)
Relative humidity	Max 95%, non-condensing
International Protection rating	IP23
Cooling	Natural / forced

CONFORMITY
EU Directive	EMC Directive 2004/108 / EC, EMC 2004/104 / EC (automotive), Low Voltage Directive 2006/95 / EC
Standards	EN 55022 (emission) EN 61000-3-2 (harmonic distortion), EN 61000-4-11, EN 61000-3-3 (voltage variations), EN 61000-6-2 A (immunity) and EN 60950-1 (safety ) AND 68-2-6 (vibration), EN 60945 (navigation and radio communications), UL 458