DC PowerCube 24 V – 150 A

ARTICLE NUMBER
60202002	DC PowerCube 24 V - 150 A

DIMENSIONS & WEIGHT
Dimensions H x W x L [mm], Weight [Kg]	575 x 221 x 316, 21 Kg

GENERAL SYSTEM SPECIFICATIONS
Nominal battery voltage	24 VDC
Output current	0 - 150 A (short circuit protected)
Output voltage	26.5 / 28.5 VDC
Recommended battery capacity:	300 to 1500 Ah
Charge characteristic	3+ step charge characteristic
Slave charger	12 V - 20 A (3+ step charge characteristic) short circuit protected

INPUT SPECIFICATIONS
Grid input voltage range	90 - 264 VAC (45 - 65 Hz), (3 wire connection)
Grid input current	Adjustable, from 2 A to 16 A
PM generator input range	80 - 300 VAC (30 - 500 Hz), (3 wire connection)
PM input current	Adjustable, from 2 A to 14.5 A
Power factor (cos phi)	> 0.85
Power Factor Correction (PFC)	EN 61000-3-2
Temperature compensation	-30 mV / °C

TECHNICAL SPECIFICATIONS
Supported battery types	Open and sealed lead acid: Gel / Traction / AGM / Spiral and Lithium-ion
Battery leakage current	<5 mA per battery
Charge voltages	Bulk, Absorption, Float
Charge voltage AGM / GEL at 25°C	28.80 VDC, 28.50 VDC, 27.20 VDC
Charge voltage Traction at 25°C	29.20 VDC, 28.90 VDC, 26.50 VDC
Charge voltage Open lead acid at 25°C	28.50 VDC, 28.50 VDC, 26.50 VDC
Charge voltage Lithium ION at 25°C	28.80 VDC, 27.20 VDC, 26.50 VDC
Return current from absorption to float	6% of Imax
PowerCube status on/off	Digital output (relay, two-way contact)
Failure	Digital output (relay, two-way contact)
AC grid disabled	Digital input (potential free input, closed is disabled)
PM input disabled	Digital input (potential free input, closed is disabled)
Conformity	Directive EMC 2004/108/EC : EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022,EN 61000-3-2, 62040-2 Low voltage directive 2006/95/EC: EN 62040-1-1, EN 50091-2, EN 60950-1

PROTECTIONS
PM input isolation protection	Yes (open collector output 30 VDC, 100 mA)
Over temperature protection	Yes, derating above 40°C, shutdown at high temperatures. (with automatic restart after cooling down)
Overvoltage protection (manual restart needed)	36 VDC + / - 0.5 VDC
Ingress Protection index	IP21

MECHANICAL SPECIFICATIONS
Main battery connection	2 x M10 studs
Slave battery connection	1 x M5 stud
Earth grounding lug	1 x M6 stud
AC grid input	3 x M3 screw terminal block
PM grid input	3 x M3 screw terminal block
Remote control panel	RJ12
Battery temperature sensor	RJ12
Whisper Connect CANbus	RJ45
Voltage sense	Phoenix MSTB 2.5 / 2-ST-5.08
Digital outputs	6 x fastons (6.3x0.8)
Digital inputs	4 x fastons (6.3x0.8)
Operating temperature range	-20 - 55°C (derating above 40°C)
Relative humidity in operation	up to 95% without condensation
Ventilation	Combined cooling (convection and forced (variable speed))
Acoustic level	<52 dB
Warranty	2 years
Accessories	Battery temperature sensor and remote control panel