Remote Battery Switch 24 V / 500 A

The DC Modular Remote Battery Switch (the Switch) is a smart high current magnetic latching contactor, that can handle continuous DC currents of up to 500 Amps. The Switch can easily be installed in an engine room or battery compartment while being controlled from a more convenient location by a small panel mounted switch. But the Switch can for instance also be controlled by a battery monitor or Lithium battery, as a discharge/overcharge protection.

Request a quotation

Where to buy

Compare this product

Equipped with a 5 wire interface cable

No current draw from the battery when the contact is closed

Protected against high/low supply voltage and high temperature

Smart function to automatically fix light to medium contact weldings

Ignition protected according to ISO8846.

Product specifications

ARTICLE NUMBER
50214734	Remote Battery Switch 24 V / 500 A

DIMENSIONS & WEIGHT
Weight (Kg)	0.8
Dimensions (mm)	150.0 x 50.0 x 94.0

TECHNICAL SPECIFICATIONS
Rated voltage	60 VDC
Nominal current	500 A
Cranking current (1min.)	1000 A
Nominal make / break current	500 A (0..34 Vdc) / 350 A (35..60 Vdc)
Peak make / break current	1600 A (0..34 Vdc) / 1200 A (35..60 Vdc)
Coil / supply voltage (+Vdc)	14..34 VDC
Coil / supply current (idle state)1)	< 100 uA
Coil / supply current (state change)1)	< 3 A

GENERAL
Remote control	By control wires
Local control2)	Top side buttons (On/Standby, Close contact, Open contact)
Indicators	Top side LEDs for Contact open, Contact closed, Error and Setup
Mechanical life	100000 cycles
Electrical life	10000 cycles
Operating temperature range	-20..+60°C
Connection stud size	M10
DC Modular grid size	1x3
Protection class	IP65
Standards	CE certified (EMC Directive 2014/30/EU, Low voltage Directive 2014/35/EU, RoHS Directive 2011/65/EU and Ignition protection standard ISO 8846)