WBI 180 A | 2 Outputs | IG

Looking for a way to charge your multiple battery banks independently? Without the heat generation of conventional battery isolators. Looking for a robust solution without changing you charging system? Meet the best-in-class electronic battery isolator: WBI 180 A | 2 Outputs | IG.

The WBI 180 A | 2 Outputs | IG low voltage drop battery isolator has a negligible voltage drop and is therefore the ultimate solution for charging multiple battery banks with charge equipment whose charge voltage cannot be adjusted. Another advantage is that due to the low voltage drop the WBI 180 A | 2 Outputs | IG does not waste charging energy. This results in a very high efficiency.

Compare this product

Increase the life of your batteries

Fast and complete charging of multiple battery banks

Connect up to 3 battery banks simultaneously

Charge up to maximal 150A

Very efficient

Product specifications

ARTICLE NUMBER
60115012	WBI 180 A \| 2 Outputs \| IG

DIMENSIONS & WEIGHT
Length x width x height	146 x 85 x 97 mm (5.7" x 3.3" x 3.8" inch)
Weight	0.685 kg (1.5 lb.)

TECHNICAL SPECIFICATIONS
Number of outputs	2 (M6)
Rated current	180 A
Peak current	200 A
Nominal system voltage	12 or 24 VDC
Input voltage range	8 - 30 VDC
Voltage drop	0.0 V @ 10 A / 0.1 V @ 20 A
Insulation to ground	> 500 V @ 60 Hz
Operating temperature	- 40 .. + 85 C
Conformity	EN 50081-1 (emission) EN 50082-1 (immunity) EN 60950-1 (safety)
Warranty	5 years