Back
60110010 Front2
60110010 Front2

WP-MC 24/12-08

In most electrical systems both 24 VDC and 12 VDC equipment are used. WhisperPower DC-DC converters take a particular voltage, for example: 24 VDC, and convert it into another DC voltage, for example: 12 VDC. The Switched Mode technology ensures minimal energy loss and high output. All our converters are fully protected against overload and high ambient temperatures. High-frequency switching technology uses the highest efficiency.

MC-Series

  • DC-DC converters with common negative
  • Step down from 24 VDC to 12 VDC
  • Electronic process, high efficiency, low heat output
  • Power rating up to 30 A
  • Cannot be used in parallel

 

Request a quotation Where to buy
  • Minimal energy loss thanks to Switched Mode technology (>90% efficiency)
  • High quality industrial design for high reliability and longer life cycle
  • Silent - no humming, only temperature controlled fans for cooling
  • No interference with radios, VHF or other sensitive equipment
  • Compact, fast and easy to install
  • Excellent price - performance ratio

Product specifications

ARTICLE NUMBER
60110010 WP-MC 24/12-08
DIMENSIONS & WEIGHT
Weight (Kg) 0.27
Dimensions (H × W × D) 50 x 98 x 88 mm
TECHNICAL SPECIFICATIONS
Converter type Voltage step down and stabilization
INPUT
Nominal input voltage 24 VDC
Input range, specifications met 18 .. 35 VDC
Input range, no defects 0 .. 35 VDC
OUTPUT
Nominal output voltage 13.8 VDC
Voltage adjustable no
Output accuracy 3%
Ripple, peak output voltage 1%
maximum power output 110 W
continuous output power 110 W
Maximum output current 8 A
Continuous output current at 40 °C up to 8 A
GENERAL
efficiency >92%
consumption no load <5 mA
Ambient operating temperature -10°C .. +40°C
Storage temperature -25° .. +85°C
Relative humidity in use up to 95%, non-condensing
Galvanic isolation Common negative
Cooling convectional
PROTECTIONS
Current / short circuit Yes / fuse
Overheating, shut down no
MECHANICAL SPECIFICATIONS
Faston in / off, max thread thickness 6 mm²
Mounting holes dia 4 mm, rh 58×90
International Protection rating IP20
Housing frame 4
Housing material Alu / ABS
Housing colour RAL 9011 graphite black
Meets the following Standards EN61000-6-3 (EN55022), EN61000-6-2 (EN61000-2/3/4, EN61000-4-3), LVD 2006/95/EC (EN60335-1), Automotive EMC 2004/104/EC, RoHS 2011/65/EU Note: The above specifications are subject to change without prior notice.

Downloads

Related products

60110030 Front1Art. Nr.: 60110030Art. Nr.: 60110030

WP-MG 24/12-3-i
View product
60110016 Front2Art. Nr.: 60110016Art. Nr.: 60110016

WP-MC 24/12-12
View product
60110011 FrontArt. Nr.: 60110011Art. Nr.: 60110011

WP-MC 24/12-20
View product
60110012 Front1Art. Nr.: 60110012Art. Nr.: 60110012

WP-MC 24/12-30
View product