WP-MG 24/12-3-i

In most electrical systems both 24 VDC and 12 VDC equipment are used. WhisperPower Switched Mode DC -DC converters take a particular voltage, for example, 24 VDC, and convert it into another DC voltage, for example, 12 VDC. The Switched Mode technology ensures minimal energy loss and high output. All our converters are fully protected against overload and high ambient temperatures. High-frequency switching technology uses the highest efficiency.

MG-Series
• DC-DC converters with galvanic isolation
• Step down from 24 VDC or 48 VDC to 12 VDC
• Step up from 12 VDC to 24 VDC is also possible
• Electronic process, high efficiency, low heat output
• Power rating up to 30 A
• Can be run in parallel for high-demand appliance

Request a quotation

Where to buy

Compare this product

Minimal energy loss thanks to Switched Mode technology (>90% efficiency)

High quality industrial design for high reliability and longer life cycle

Silent - no humming, only temperature controlled fans for cooling

No interference with radios, VHF or other sensitive equipment

Compact, fast and easy to install

Excellent price - performance ratio

Product specifications

ARTICLE NUMBER
60201023	WP-MG 24/12-3-i

DIMENSIONS & WEIGHT
Weight (Kg)	0.250
Dimensions (H × W × D)	50 × 85 × 88mm

TECHNICAL SPECIFICATIONS
Converter type	voltage step down and stabilization

INPUT
Nominal input voltage	24 VDC
Input range, specifications met	20 .. 35 VDC
Input range, no defects	0 .. 35 VDC

OUTPUT
Nominal output voltage	12.5 VDC
Voltage adjustable	Yes
Output accuracy	3%
Ripple, peak output voltage	1%
maximum power output	38 W
continuous output power	36 W
Maximum output current	3 A
Continuous output current at 40 °C	up to 3 A

GENERAL
efficiency	>87%
consumption no load	<25 mA
Ambient operating temperature	-10°C .. +40°C
Storage temperature	-25° .. +85°C
Relative humidity in use	up to 95%, non-condensing
Galvanic isolation	Yes, 500 Vac
Cooling	Mechanical

PROTECTIONS
Current / short circuit	Restricted by current rating
Overheating, shut down	Power restricted by temperature

MECHANICAL SPECIFICATIONS
Faston in / off, max thread thickness	6 mm²
Mounting holes	dia 4 mm, rh 58 x 168
International Protection rating	IP20
Housing	frame 7
Housing material	Anodized aluminium, ABS end caps
Housing colour	RAL 9011 graphite black
Meets the following Standards	EN61000-6-3 (EN55022), EN61000-6-2 (EN61000-2/3/4, EN61000-4-3), LVD 2006/95/EC (EN60335-1), Automotive EMC 2004/104/EC, RoHS 2011/65/EU Note: The above specifications are subject to change without prior notice.