MG 24-12 VDC 16 A -i

DC-DC step-down converter MG 24-12 VDC 16 A -i. Supplies devices with 12 VDC while the battery produces 24V. This buck converter features an electronic process that ensures high efficiency with minimal heat output. Its effectiveness and reliability make it a perfect solution for stable voltage conversion. This version features galvanic isolation, ensuring additional stability through segregated current pathways.

Compare this product

Galvanic isolated

Voltage step down and stabilization

Premium quality industrial design for high reliability and longer life cycle

Silent, no humming, only temperature-controlled fans for cooling

No interference with radios, VHF or other sensitive equipment

Compact, fast and plug-and-play installation

Can be run in parallel for high-demand appliance

Product specifications

ARTICLE NUMBER
60110020	MG 24-12-16-i

DIMENSIONS & WEIGHT
Length x width x height, mm (in.)	50 x 176 x 88 (2 x 6.9 x 3.5)
Weight, kg (lb.)	0.63 (1.4)

TECHNICAL SPECIFICATIONS
Converter type	voltage step down and stabilization

INPUT
Nominal input voltage	24 VDC
Input range, specifications met	20 .. 35 VDC
Input range, no defects	0 .. 35 VDC

OUTPUT
Nominal output voltage	12.5 VDC
Voltage adjustable	Yes
Output accuracy	3%
Ripple, peak output voltage	1%
maximum power output	200 W
continuous output power	200 W
Maximum output current	16 A
Continuous output current at 40 °C	up to 16 A

GENERAL
efficiency	>87%
consumption no load	<25 mA
Ambient operating temperature	-10°C .. +40°C
Storage temperature	-25° .. +85°C
Relative humidity in use	up to 95%, non-condensing
Galvanic isolation	Yes, 500 Vac
Cooling	Mechanical

PROTECTIONS
Current / short circuit	Restricted by current rating
Overheating, shut down	Power restricted by temperature

MECHANICAL SPECIFICATIONS
Faston in / off, max thread thickness	6 mm²
Mounting holes	dia 4 mm, rh 58 x 168
International Protection rating	IP20
Housing	frame 8
Housing material	Anodized aluminium, ABS end caps
Housing colour	RAL 9011 graphite black
Meets the following Standards	EN61000-6-3 (EN55022), EN61000-6-2 (EN61000-2/3/4, EN61000-4-3), LVD 2006/95/EC (EN60335-1), Automotive EMC 2004/104/EC, RoHS 2011/65/EU Note: The above specifications are subject to change without prior notice.