WPC 48 V / 8000 VA – 120 A

ARTICLE NUMBER
60201004	WPC 48 V / 8000 VA - 120 A

TECHNICAL SPECIFICATIONS
Nominal battery voltage	48 VDC
Continuous power @ 25°C	7000 VA
Power 30 min. @ 25°C	8000 VA
Power 5 sec. @ 25°C	21 kVA
Maximum load	Up to short-circuit (fully protected)
Maximum a-symmetric load	Up to continuous power
Load detection (stand-by)	2 to 25 W (AES) Automatic Enable System
Power factor	0.1 - 1
Efficiency (@ full load)	96 %
Consumption OFF / Stand-by / ON	1.8 W / 2.4 W / 30 W
Output voltage	Pure sine wave 230 VAC (+/- 2%)
Output frequency	50 Hz / 60 Hz (1) +/- 0.05% (crystal controlled)
Harmonic distortion (voltage)	<2% THD
Overload and short-circuit protection	Automatic disconnection with 3 time restart attempt
Overheat protection	Warning before shut-off with automatic restart

BATTERY CHARGER SPECIFICATIONS
Charge Characteristic	6-step Bulk - Absorption - Floating - Equalization - reduced floating - periodic absorption. Number of steps, thresholds and return amps are completely adjustable.
Maximum charging current	120 A
Temperature compensation	With Whisper temperature sensor WPC-BTS
Input voltage range	150 to 250 VAC
Input frequency range	45 to 65 Hz
Input current max. (transfer relay) / Output current max.	50 A / 80 A
Transfer time	<15 ms

MAIN SPECIFICATIONS
Weight	46 kg
Dimensions H x W x D [mm]	500 x 300 x 230
Protection degree	IP21
Color	RAL 9003
Conformity	low voltage directive (LVD) 2014/35/EU: EN/IEC 62477-1, 62109-1, 62109-2, 62040-1, electromagnetic compliance (EMC) directive 2014/30/EU: EN/IEC 61000-3-2, 61000-3-3, 61000-6-2, 61000-6-4, 62040-2
Operating temperature range	-20..+40°C, derating to 55°C
Relative humidity (operational)	95% without condensation
Warranty	2 years
Acoustic level	<40 dB / <45 dB (without / with ventilation)

ACCESSORIES
60201032	WPC-BUS cable 15 meter
60201030	WPC auto start cable 15 meter
60201021	WPC 24 VDC - 5 A slave charger (optional second slave charger to be 'build in' WPC)
40280101	Touchpanel screen full color 7”