WVG 60

The Voltage Battery Guard WVG 60 is an intelligent, fully waterproof, battery guard with expansion capabilities for an on / off switch, alarm buzzer or relay and our Battery Watch (not supplied).

Compare this product

Provided with an ‘Automatic board system detection’

Fully waterproof

Product specifications

ARTICLE NUMBER
60110250	WVG 60

DIMENSIONS & WEIGHT
Length x width x height	82 x 41 x 65 mm (3.2" x 1.6" x 2.6" inch)
Weight	0.730 kg (1.6 lb.)

TECHNICAL SPECIFICATIONS
Cable diameter	15 mm2
Automatic detection of 12V or 24V system	8 - 20 V > 12 V mode / 20 - 35 V > 24 V mode
Adjustable undervoltage programs	10
Overvoltage disconnect voltage	12 V mode > 16 / 24 V mode > 32 V
Maximum load / shutdown	approx 60 A - 65 A
Surge	120 A
Voltage drop	0,1 V @ 60 A
Current consumption	Output active: 4 mA / Output active: 2 mA
Shutdown at overload / short circuit	After 5 seconds (switch on again after 1 minute)
Voltage accuracy	2%
Current accuracy	20%
IP-code	IP66