PMG frame 2

€3,938.00 (excl. taxes)

Special: the PMG is through serial number related to your generator. Add the serial number of your generator in the comments to your order. The serial number can be found on the type plate of your generator.

Compare this product

(230 VAC) suitable for: Piccolo 8 | Piccolo 10 | Piccolo 12

(230 VAC) suitable for: Elite 8 | Elite 8 Outdoor | Elite 10 | Elite 12

(120 VAC) suitable for: Piccolo 6 | Piccolo 8

(120 VAC) suitable for: Elite 8 | Elite 8 Outdoor

Product specifications

ARTICLE NUMBER
60201409	PMG frame 2 - 230 VAC \| 50 Hz
60201419	PMG frame 2 - 120 VAC \| 60 Hz

DIMENSIONS & WEIGHT
Weight	9.9 kg \| 21.8 lb
Dimensions (h x w x d) mm	490 × 198 × 191
Dimensions (h x w x d) inch	19.3 x 7.8 x 7.5

GENERAL SPECIFICATIONS
Suitable for: (230 VAC version)	Genverter 8, 10, 12
Suitable for: (120 VAC version)	Genverter 6, 8
Output load	True sine
Output voltage stability	+/- 5% (resistive load step 0 .. 100%)
Frequency variations	< 1%
Output current (230 VAC version)	44 A
Output current (120 VAC version)	53 A
Nominal efficiency (@ full load)	95%
Peak efficiency	97%
Input voltage	3 times 260 .. 400 VAC
Input frequency	200 .. 400 Hz

TECHNICAL SPECIFICATIONS
Voltage THD (Total Harmonic Distortion)	< 5%
Short circuit protection	Yes
Mean time between failure	10 years
Lifetime expectancy (@ 40°C and nominal load)	100,000 hours
USB	For software parameter configuration
Potentional-free status contact	Inverter enabled / disabled
Remote panel connection	RJ12 twisted cable
Engine interface connection	Engine RPM request (pwm signal)

OPERATING CONDITIONS
Operating temperature	-20 .. 70°C (linear derating above 40°C)
Storage temperature	-40 .. 80°C
Relative humidity in operation/storage	Max. 95% non-condensing
Protection degree	IP23
Ventilation	Forced cooling (temperature and load dependent)

CONFORMITY
Compliance	Directives: EMC 2004/108/EC, LVD 2006/95/EC, Standards: EN 55022 (emission), EN 61000-3-2 (harmonics) EN 61000-3-3 (voltage fluctuations), EN 61000- 6-1 (immunity), EN 60950-1, EN 60335-1, EN 60335-2-29 (safety), EN 68-2-6 (vibration), UL 458 (power converters / inverters)