WP-MC 12/24-10

In most electrical systems both 24 VDC and 12 VDC equipment are used. DC-DC converters take a particular voltage, for example, 24 VDC, and convert it into another DC voltage, for example: 12 VDC. The Switched Mode technology ensures minimal energy loss and high output. All our converters are fully protected against overload and high ambient temperatures. High-frequency switching technology uses the highest efficiency.

MC-Series

DC-DC converters with common negative
Step down from 24 VDC to 12 VDC
Electronic process, high efficiency, low heat output
Power rating up to 30 A
Cannot be used in parallel

Where to buy

Compare this product

Minimal energy loss thanks to Switched Mode technology (>90% efficiency)

High quality industrial design for high reliability and longer life cycle

Silent - no humming, only temperature controlled fans for cooling

No interference with radios, VHF or other sensitive equipment

Compact, fast and easy to install

Excellent price - performance ratio

Product specifications

ARTICLE NUMBER
60110017	WP-MC 24/12-10

DIMENSIONS & WEIGHT
Weight (Kg)	0.36
Dimensions (h × w × d)	50x126x88 mm

TECHNICAL SPECIFICATIONS
Converter type	voltage step down and stabilization

PROTECTIONS
Current / short circuit	Yes / fuse
Overheating, shut down	no

GENERAL
efficiency	>93%
consumption no load	<5mA
Ambient operating temperature	-10°C .. +40°C
Storage temperature	-25° .. +85°C
Relative humidity in use	up to 95%, non-condensing
Galvanic isolation	Common negative
Cooling	convectional

MECHANICAL SPECIFICATIONS
Faston in/ off, max thread thickness	6mm²
Mounting holes	dia 4mm, rh 58×118
International Protection rating	IP20
Housing	frame 5
Housing material	Alu / ABS
Housing colour	RAL 9011 graphite black
Meets the following Standards	EN61000-6-3 (EN55022), EN61000-6-2 (EN61000-2/3/4, EN61000-4-3), LVD 2006/95/EC (EN60335-1), Automotive EMC 2004/104/EC, RoHS 2011/65/EU Note: The above specifications are subject to change without prior notice.

INPUT
Nominal input voltage	12 VDC
Input range, specifications met	9 .. 18 VDC
Input range, no defects	0 .. 18 VDC

OUTPUT
Nominal output voltage	25 VDC
Voltage adjustable	no
Output accuracy	3%
Ripple, peak output voltage	3%
maximum power output	300 W
continuous output power	250 W
Maximum output current	12 A
Continuous output current at 40 °C	up to 10 A